News & Technical Notes — Page 2
Industry insightPublished: MPPT vs Fixed-Voltage Solar Pumping: Which Wins?Why MPPT beats fixed-voltage solar pumping on cloudy days and partial shading, plus wiring and battery-less design rules that keep a solar pump running reliably through the season.
Industry insightPublished: Calculating VFD Energy Savings and Payback in Four StepsVFD savings are never a fixed percentage — they follow the torque curve of the load. Here is a four-step method to estimate annual kWh, annual saving and payback for fan, pump and compressor duty using the affinity laws and your own tariff.
Industry insightPublished: RS485 Modbus or Modbus TCP? Wiring a VFD into a Control SystemSerial RS485 Modbus RTU still carries most drive integration, but Ethernet is gaining fast. Comparing cable, distance, polling speed and cost helps you specify the right port on the purchase order instead of paying for a gateway later.
Company newsPublished: WEG Delegation Visits Wuxi Plant to Discuss Drive Technology CooperationA senior delegation from Brazilian motor and automation group WEG visited the Wuxi works. Talks covered drive technology from 380 V up to 10 kV, four-quadrant and marine drives, and how the two product portfolios could work together.
Company newsPublished: Aturia Visits Yolico to Scope Drives for Pumps and Marine ApplicationsItaly's Aturia, a fluid-handling group whose history starts with centrifugal pumps in 1927, sent a delegation to Wuxi to match Yolico drives against chemical, mining and offshore equipment.
Industry insightPublished: VFD Fault Codes Decoded: OC, OV, OL and What They Really MeanNearly every drive trip belongs to one of four families: overcurrent, overvoltage, overload or overtemperature. Diagnosing them in the right order turns an alarming red display into a five-minute check with a meter.
Industry insightPublished: Sizing a VFD for a Screw Air CompressorAir compressors are constant-torque loads but they are not ordinary ones: unloaded running, oil temperature and a narrow usable speed band all change the calculation. Here is how to size the drive and avoid the classic resonance problem.
Industry insightPublished: VFD Panel Cooling: Derating Rules and Ventilation DesignEvery drive is rated at a reference ambient temperature, usually 40 degrees Celsius. Above that, the continuous output current must come down. This note covers the derating curve, altitude derating and how to size panel ventilation without importing dust.
Industry insightPublished: Solar Pump Inverter or Standard VFD for Off-Grid Irrigation?A solar pump inverter and a standard VFD both control a motor, but only one is designed to harvest a varying DC source, protect a pump against dry running and survive a remote site. Here is how to choose.
Company newsPublished: 2025 Product Launch: Intelligent Low-Voltage, High-Voltage and AFE Drive FamiliesThe 2025 launch added a compact YD180, a modular YD280, an IoT-connected YD580, an IP54 range tested for polar, desert and salt-spray conditions, and a high-voltage four-quadrant drive with THDi at or below 5 %.
